Features
- 800VA UPS capacity
- Internal battery
- 1-Phase input, 1-phase output
- Line interactive topology
- Microprocessor control
- Auto charging in off mode
- Auto restart function
- Power management with smart USB interface for CLT11-0T8iA & CLT11-0T8iB and RS232 interface for CLT11-0T8iC
- RJ11 protection for CLT11-0T8iA
Technical Specifications
|
General |
|
| UPS model | CLT11-0T8i/ CLT11-0T8iA/ CLT11-0T8iB/ CLT11-0T8iC |
| Rated power | 800VA/480W |
| Applicable standards | IEC62040‐3 |
| UPS topology | Line interactive |
| Efficiency | >97% |
| Dimensions (HxWxD) | 142×101×298 mm |
| Weight | 5.3kg |
| Acoustic noise at 1m | <40dBA |
| Degree of protection against hazards and water ingress | IP20 |
| Mean Time Between Failures (MTBF) | 50,000h |
|
Environmental |
|
|
Storage and operating temperature for maximum battery life |
15°C to +25°C |
| Operating temperature | 0°C to +40°C |
| UPS Storage temperature without battery | -20°C to +70°C |
| Humidity | 0 to 95% non-condensing |
| Altitude at rated power | ≤ 1500m |
|
Input |
|
| Phases required | 1Ph+N+PE |
| Rated voltage | 220Vac |
| Voltage tolerance | 162 to 270 VAC |
| Frequency range | 50Hz±10% |
| Power factor in normal mode and full load | Same as the load |
|
Output |
|
| Output wave form | Modified sine wave |
| Output phases available | 1Ph+N+PE |
| Rated voltage | 220Vac |
| Voltage regulation | ±10% |
| Power factor | 0.6 |
| Frequency | 50Hz ±1 |
| Crest factor | 3:1 |
| Transfer time | 3 to 8 ms |
|
Isolation |
|
| Magnetic isolation by iron core between AC and DC | Yes
(Transformer Based) |
| Isolation class | F |
|
Battery |
|
| Battery voltage | 12V |
| Battery type | VRLA (Sealed lead acid) |
| Battery installation | Internal battery |
| Internal battery capacity | 7.2Ah |
| Max. battery charge current | 0.9A |
| Max. Battery capacity | 9Ah |
|
Protections |
|
|
Output overvoltage and undervoltage |
|
|
Overload |
|
|
Battery overcharge and discharge |
|
|
RJ11 protection against transient voltage (Spike) for CLT11-0T8iA |
|
|
Display |
|
| LED Status | AC mode: Green LED
Battery mode: Yellow LED Fault: Red LED |
|
Communication interface |
|
|
USB (CLT11-0T8iA & CLT11-0T8iB), RS232 (CLT11-0T8iC) |
|